Diaphragm pressure gauges are considered as specialists along the way industries. Productive enter into play when Bourdon tube pressure gauges reach the limits of their performance. Among the advantages of diaphragm pressure gauges is the measurement of low pressures.
Diaphragm pressure gauges can be recognised from the first look: From the flanges below the case, between which the elastic pressure element ? the diaphragm element ? is clamped. These instruments can measure pressures from as low as 16 mbar, with the maximum value at around 25 bar (for comparison: Bourdon tube gauges reach their lowest physically possible measured value at 600 mbar). The bigger the diaphragm element, the low the measurable pressure is, relative to the formula ? pressure = force / area. WIKA uses two diaphragm sizes: with a diameter of 134.5 mm for the measuring ranges of 0 ?16 mbar up to 0 ? 250 mbar and a diameter of 76.5 mm for the measuring ranges of 0 ? 400 mbar around 0?25 bar.
Special variation of diaphragm pressure gauges
With pressures under 16 mbar, diaphragm pressure gauges hit their limits. For this case, their diaphragms would have to be exceptionally thin in order to achieve the required elasticity. Then, however, they would no longer remain reliably stable. This issue can be solved, though, with a particular variation of the diaphragm pressure gauge: the capsule pressure gauge.
Capsule elements contain two diaphragms welded together, which are generally packed with pressure from the within. This results in a double diaphragm travel. In this way, even the cheapest of pressures could be measured without reducing the wall thickness. However, because the pressure chamber isn’t self-draining, capsule elements aren’t ideal for applications with liquid media.
Note
Reveal can find further information on diaphragm pressure gauges on the WIKA website beneath the headings Pressure gauges and Pressure gauges with output signal.
See also our article
Benefits of diaphragm pressure gauges (2): High overload protection